196-4037 Quick Dry Fleet & Fabrication Primer
Is a quick dry, high solids, solventborne acrylic modified primer. It is ideal as a corrosion resistant primer for OEM Product Finishing and for Fleet and Equipment Refinishing. It dries to touch in 20-30 minutes and is recoatable in 2 hours. It can be topcoated with a wide variety of solvent or waterborne topcoats. When used in conjunction with 951 series Fleet & Fabrication Acrylic Enamels it provides the foundation of an excellent quick dry system for trucks, trailers, equipment and fabricated steel. White, also available in gray, red oxide and factory made custom colors.
Technical Data Sheet PDF: 196-4037
High solids, solvent borne primers for spray application exhibiting fast drying characteristics. Suitable for topcoating with various solvent- and waterborne systems. Ideal for use in fabrication shops and on structural steel and aluminum. Shop Coat Primer 961 and Low Odor Shop Primer 963.
196-4533 Quick Dry LV Epoxy Primer
Is a quick dry, low VOC (2.8), sandable, two component epoxy primer for OEM Product Finishing and for Fleet and Equipment Refinishing. It dries to re-coat in as quick as one hour and has unsurpassed adhesion and corrosion resistance. It serves as a high build, sandable primer under a wide variety of solvent or waterborne coatings including epoxies, urethanes and acrylic enamels. This product may be applied by brush, roll or spray at temperatures as low as 35F and will cure down to 20F. Available in gray, yellow and factory made custom colors.
Technical Data Sheet PDF: 196-4533
Quick Dry Equipment Enamels 951, 955
High gloss, solvent borne, acrylic-modified alkyd enamels with exceptionally fast air drying. Enhanced durability and outstanding corrosion and weather resistance. Ideal for OEM, field or repaint application on steel and aluminum. Available in popular ready-mix colors and tintable bases. Gloss Enamels 951 and Satin Enamels 955.
DTM Water Reducible Alkyd Enamel 970, 974
Air dry enamels thinned with water designed for coating properly prepared metal surfaces. Low VOC and good corrosion resistance make this coating ideal for coating structural steel or for OEM applications. Available in a wide array of ready-mix colors and tintable bases in gloss and satin sheens. Custom colors also available. Gloss Enamels 970 and Satin Enamels 974.
Alkyd Equipment Enamels 931, 937, 939, 941
A series of fast, air drying, solventborne alkyd coatings designed for painting properly prepared metal surfaces. Corrosion resistant, high gloss finish recommended for tractors, implements, trailers and other machinery. Gloss Enamels 931. Metal primers; Red 937, Gray 939 and Yellow 941.
High Solids Epoxy Mastic is a high build, surface tolerant epoxy that may be used as a primer, intermediate coat or finish coat in a wide variety of coatings systems. It features excellent adhesion when applied to clean steel, aluminum and concrete and provides excellent adhesion and protection of sound rusted surfaces. 9909 cures to an extremely durable film, resisting abrasion, corrosion and many chemicals. It can be brushed, rolled or sprayed. It is available in white, black, gray, safety colors, tint bases and factory made custom batches.
Technical Data Sheet PDF: 9909 Series
High Solids Acrylic Aliphatic Polyurethane is a high solids, high build, high performance two component solvent based urethane. This extreme high gloss finish offers outstanding gloss and color retention plus excellent abrasion and chemical resistance. When used in conjunction with 4533 or 9909 Epoxy Primers, 9925 provides an excellent coating system for fleet and equipment applications as well as storage tanks, towers, bridges, catwalks, buildings, railings, doors and more. It can be brushed, rolled or sprayed. It is available in white, black, gray, safety colors, tint bases and factory made custom batches
Technical Data Sheet PDF: 9925