Concrete Floor Seals & Finishes
Industrial & Commercial Coatings
Safety Slip-Resistant Coatings
Preparation & Maintenance Tools

WOOD FLOOR COATINGS

Oil Modified Urethane (1040, 1050):
A high gloss, solventborne finish designed for coating a variety of wood floor surfaces including maple, oak, pine, and parquet. These clear finishes exhibit a light amber cast that enhances the warmth and depth of the wood. These products are highly resistant to abrasion, scuffing, marring, and repeated cleaning making them ideal for gymnasiums, offices, showrooms and a variety of other heavy traffic areas.

OMU Sanding Sealer: (1035)
A fast drying, solventborne coating formulated to penetrate and seal bare wood surfaces before finishing. This product contains no stearates making it suitable for use under oil modified urethanes as well as a variety of other finishes. Dries to a clear film that does not obscure the wood grain. Typically dry for sanding in 4-6 hours. Additional coats may be applied if desired or on very porous woods that may not be completely sealed in one coat.

Epoxy Ester Resin Finish: (9040)
A high gloss, one-component, solventborne coating formulated to provide additional chemical resistance for wood floors beyond typical alkyd and OMU finishes. These clear products are pale in color and dry to form a durable film that resists abrasion and many chemicals such as oil, grease, alcohol, mild solvents, cleaners, weak acids and alkalis. Suitable for use where a heavy duty floor finish is desired including gymnasiums, offices, showrooms and a variety of other areas.

Kleer Kote (0400):
A high gloss, waterborne, polyurethane coating designed for application to a variety of wood surfaces including maple, oak, pine, and parquet. These clear finishes are low odor, low VOC, and dry quickly allowing the application of multiple coats in a single day. These products are highly resistant to abrasion, scuffing, marring, and repeated cleaning making them ideal for gymnasiums, offices, showrooms and a variety of other heavy traffic areas.

Moisture Cure Urethane: (9640)
A high gloss, solventborne, floor coating exhibiting ultimate hardness and chemical resistance in a one-component system. This clear finish is formulated for use on interior concrete and wood surfaces where harsh conditions are encountered. Exhibits outstanding resistance to abrasion, marring, and scuffing as well as foot, tow motor, forklift and vehicular traffic. Chemical resistance is excellent including against oil, grease, hydraulic fluid, many solvents, and moderate acids and alkalis. Suitable for use in factories, warehouses, parking decks, aircraft hangars, service stations, gymnasiums, and many other locations.

Dura-Gard Acrylic Latex Tred-Safe: (730)
A moderate duty, waterborne, slip resistant coating designed for application on interior or exterior wood, concrete, and metal surfaces. Available in a variety of ready-mix colors, these coarse texture products reduce the hazards of slippery areas especially when those areas become wet. These coatings have outstanding resistance to weathering, abrasion, and mild chemicals. Recommended for use around pools and on steps, ramps, sidewalks, catwalks, boat decks and similar surfaces.

Heavy Duty Non-Skid: (9000)
A solventborne, slip resistant coating formulated for heavy duty applications found in factories, warehouses, service stations, schools and many other areas. Available in a variety of ready-mix colors, these coarse texture products reduce the hazards of slippery areas especially when those areas become wet. The resin system is enhanced for added resistance to water, abrasion, and chemicals beyond moderate duty non-slip coatings. Recommended for use on interior wood, concrete and metal found on steps, walkways, ramps, shower room floors, catwalks and many other surfaces.

Epoxy Ester Enamel: (6000)
A high gloss, one-component, solventborne coating formulated to provide additional chemical resistance beyond typical alkyd and OMU finishes. Available in a variety of ready-mix colors, these products dry to form a durable film that resists abrasion and many chemicals such as oil, grease, alcohol, mild solvents, cleaners, weak acids and alkalis. Suitable for interior use on wood, concrete and metal where a heavy duty floor finish is desired. Typical applications include gymnasiums, offices, showrooms, service stations, and a variety of other areas.

Dura-Gard Acrylic-Polyurethane Floor Paint: (736)
A waterborne, floor and trim coating designed for application on interior or exterior concrete and primed metal surfaces. Available in a variety of ready-mix colors, these semi-gloss products dry to form a durable film that resists weathering, abrasion and many chemicals. May also be used on interior wood surfaces. These coatings are fast drying and can typically be walked on or recoated after 12 hours. May be used where a moderate duty coating with easy application and clean up properties is suggested.

Dura-Gard Alkyd-Polyurethane Floor & Trim Enamel: (739)
A high gloss, solventborne coating modified with polyurethane to enhance the abrasion and chemical resistance properties of the finish. Available in a variety of ready-mix colors, these products dry to form a durable film that resists abrasion, marring, and scuffing as well as foot, tow motor and forklift traffic. Also resistant to chemicals such as oil, grease, alcohol, mild solvents, cleaners, weak acids and alkalis. Recommended for many interior or exterior wood, concrete, and metal surfaces.


Excelsior Coatings
1329 Harrison Ave. SW, Canton, OH 44706
Phone: 800.292.5755 Fax: 330.454.1750
E-mail